- Home
- Products
- CNC Slant Bed Lathe
- CDS100/CDS100M/CDS100P New CNC Slant Bed Lathe with Built-in Spindle
1 / 3
CDS100/CDS100M/CDS100P New CNC Slant Bed Lathe with Built-in Spindle
CDS 100 Series New CNC Slant Bed Lathe Introduction
Maximum Machining Diameter: 330mm
Maximum Machining Length: 360mm
Chuck Size: 6" inch
TECHNICAL PARAMETERS
CDS100/CDS100M/CDS100P New CNC Slant Bed Lathe with Built-in Spindle — Description
CDS 100 Series New CNC Slant Bed Lathe Introduction
The lathe is equipped with advanced CNC (Computer Numerical Control) technology that allows precise control of the machining process, resulting in increased accuracy and efficiency. The tilting bed design improves chip evacuation and provides easier access to the workpiece, increasing overall productivity.
1. The lathe uses an integrated hydraulic servo turret with high positioning accuracy, fast tool change time, and minimal deformation under heavy cutting.
2. The linear rolling guideway enables high-speed, high-efficiency operation. It reduces friction, temperature-rise deformation, boosts processing accuracy, and ensures long-term cutting accuracy stability.
3. X/Z-axis servo motors are directly connected to the precision ballscrew
Description of the basic structural features of the Lathe machine tool
1, Bed
The bed adopts an integrated high-low rail bed design, with a thick-walled, multi-ribbed, multi-cavity structure to ensure heavy cutting capabilities. The bed is cast with high-quality resin sand, with good rigidity, good shock resistance, and smooth chip removal.
2, Spindle box
The spindle bearings use high-quality, high-precision bearings and a servo synchronous electric spindle, which provides high torque and stable output. The spindle box bearings use double-row cylindrical roller bearings and double-direction thrust angular contact bearings, which provide high rigidity. The heat dissipation adopts a structural design that reduces the thermal deformation of the spindle, enabling the spindle to maintain the relative stability of the spindle axis during long-term operation.
3, Feed system
The X and Z axis servo motors are directly connected to the precision ball screw through elastic couplings, with hi
Main Machine Components
| Integrated Servo Turret The integrated turret has high structural rigidity and short tool-change time. These features reduce assembly accuracy deviation, ensure the accuracy of the machine tool, and improve processing efficiency. | |
| Built-In Spindle The spindle is driven by a high-torque, high-efficiency, and high-performance permanent magnet synchronous motor. Additionally, P4 double-row short cylindrical roller bearings are adopted. This setup ensures the spindle's high precision, rigidity, and stability. Spindle Speed: 5000rpm Spindle Power: 12.3kW Spindle Taper Hole: Ф56mm | |
| Guideway of the Bed The bed guideway adopts the 30° high-low rail structure used in Japanese-style machine tools, ensuring the rigidity, precision, and stability of the machine during heavy-cutting operations. The automated loading and unloading unit (optional) is integrated with the machine, significantly reducing the floor space. X/Z-axis Travel: 155/362mm X/Z-axis Rapid Traverse Speed: 25/30m/min |
Configuration
| Standard Equipment | Optional Equipment |
|---|---|
| 1. SIEMENS 828D Basic Control System | 1. FANUC 0i-TF Plus Control System |
| 2. A2-5 | 2. GSK 988TA Absolute Control System |
| 3. Built-in Spindle | 3. RENEISHAW Auto Tool Setter |
| 4. Hydraulic Through Chuck 6inch | 4. Auto BarFeeder |
| 5. Hydraulic Servo 8 Tool Post Turret | 5. Oil Skimmer |
| 6. Servo Programmable Tailstock | 6. Chip Conveyor |
| 7. Roller Linear Guideway |
CDS 100 New Slant Bed Lathe Specification
| Configuration | CDS100 | |||
|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 450 | |
| Maximum Swing Over Slide | φ/mm | 230 | ||
| Maximum Machining Length | mm | 360 | ||
| Maximum Machining Diameter | φ/mm | 330 | ||
| Maximum Diameter of Bar | φ/mm | 45 | ||
| Built-in Spindle | Spindle Head Type | GB59001 | A2-5 | |
| Spindle Taper Hole | φ/mm | 56 | ||
| Spindle Speed Range | r/min | 50-5000 | ||
| Spindle Shift Mode | Built-in Spindle | |||
| Spindle Output Torque | N·m | Rated 39 | ||
| Spindle Power | kW | 12.3 | ||
| Chuck Type | Hydraulic Through Chuck | |||
| Chuck Size | inch | 6" | ||
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 | |
| Rapid Traverse Speed On Z-axis | m/min | 30 | ||
| Servo Motor Torque On X-axis | N·m | 6 | ||
| Servo Motor Torque On Z-axis | N·m | 6 | ||
| Servo Motor Torque On Z1-axis | N·m | 4 | ||
| X-axis Travel | mm | 155 | ||
| Z-axis Travel | mm | 362 | ||
| Guideway Type | Roller Linear Guideway | |||
| Turret | Turret Type | Hydraulic Servo 8 Tool Post Turret | ||
| Tool Size | mm | 20×20/φ25 | ||
| Tailstock | Tailstock Type | Servo Programmable | ||
| Tailstock Travel | mm | 360 | ||
| Internal Taper of Tailstock Sleeve | MT4 | |||
| Power Source | Total Rated Power | KVA | 20 | |
| Total Rated Current | A | 52 | ||
| Dimension | Machine Weight | kg | 2400 | |
| Machine Dimension | L*W*H(mm) | 1940×1370×1710 |
Appearance and parameters may slightly differ depending on the selected options.
CDS 100M Slant Bed Lathe Specification
| Configuration | CDS100M | |||
|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 450 | |
| Maximum Swing Over Slide | φ/mm | 280 | ||
| Maximum Machining Length | mm | 170 | ||
| Maximum Machining Diameter | φ/mm | 260 | ||
| Maximum Diameter of Bar | φ/mm | 45 | ||
| Built-in Spindle | Spindle Head Type | GB59001 | A2-5 | |
| Spindle Taper Hole | φ/mm | 56 | ||
| Spindle Speed Range | r/min | 50-5000 | ||
| Spindle Shift Mode | Built-in Spindle | |||
| Spindle Output Torque | N·m | Rated 39 | ||
| Main Motor Power | kW | 12.3 | ||
| Chuck Type | Hydraulic Through Chuck | |||
| Chuck Size | inch | 6" | ||
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 | |
| Rapid Traverse Speed On Z-axis | m/min | 25 | ||
| Servo Motor Torque On X-axis | N·m | 6 | ||
| Servo Motor Torque On Z-axis | N·m | 6 | ||
| Servo Motor Torque On Z1-axis | N·m | 4 | ||
| X-axis Travel | mm | 155 | ||
| Z-axis Travel | mm | 285 | ||
| Guideway Type | Roller Linear Guideway | |||
| Turret | Turret Type | 12 Tool Post Driven Tool Turret(BMT40) | ||
| Tool Size | mm | 20×20/φ25/ER20 | ||
| Tailstock | Tailstock Type | Servo Programmable | ||
| Tailstock Travel | mm | 390 | ||
| Tailstock Sleeve Diameter | φ/mm | 65 | ||
| Internal Taper of Tailstock Sleeve | MT4 | |||
| Power Source | Total Rated Power | KVA | 20 | |
| Total Rated Current | A | 52 | ||
| Dimension | Machine Weight | kg | 2450 | |
| Machine Dimension | L*W*H(mm) | 2040×1370×1710 |
Appearance and parameters may slightly differ depending on the selected options.
CDS 100P CNC Slant Bed Lathe Specification
| Configuration | CDS100P | |||
|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 500 | |
| Maximum Swing Over Slide | φ/mm | 180 | ||
| Maximum Machining Length | mm | 330 | ||
| Maximum Machining Diameter | φ/mm | 180 | ||
| Maximum Diameter of Bar | φ/mm | 45 | ||
| Built-in Spindle | Spindle Head Type | GB59001 | A2-5 | |
| Spindle Taper Hole | φ/mm | 52 | ||
| Spindle Speed Range | r/min | 50-5000 | ||
| Spindle Shift Mode | Built-in Spindle | |||
| Spindle Output Torque | N·m | Rated 39 | ||
| Spindle Power | kW | 12.5 | ||
| Chuck Type | Hydraulic Through Chuck | |||
| Chuck Size | inch | 6" | ||
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 | |
| Rapid Traverse Speed On Z-axis | m/min | 25 | ||
| Servo Motor Torque On X-axis | N·m | 6 | ||
| Servo Motor Torque On Z-axis | N·m | 6 | ||
| Servo Motor Torque On Z1-axis | N·m | 4 | ||
| X-axis Travel | mm | 370 | ||
| Z-axis Travel | mm | 410 | ||
| Guideway Type | Roller Linear Guideway | |||
| Turret | Turret Type | Gang Type | ||
| Tool Size | mm | 20×20/φ25 | ||
| Tailstock | Tailstock Type | No Tailstock | ||
| Tailstock Travel | mm | —— | ||
| Internal Taper of Tailstock Sleeve | —— | |||
| Power Source | Total Rated Power | KVA | 20 | |
| Total Rated Current | A | 52 | ||
| Dimension | Machine Weight | kg | 2200 | |
| Machine Dimension | L*W*H(mm) | 1940×1370×1710 |
Appearance and parameters may slightly differ depending on the selected options.
