- Home
- Products
- CNC Slant Bed Lathe
- C46K MSY/C46K CNC Slant Bed Lathe with Gang Tooling
1 / 4
C46K MSY/C46K CNC Slant Bed Lathe with Gang Tooling
C46K Series CNC Slant Turn Machine Introduction
Maximum Machining Diameter: 160mm
Maximum Machining Length: 180mm
Chuck Size: 6" inch
TECHNICAL PARAMETERS
C46K MSY/C46K CNC Slant Bed Lathe with Gang Tooling — Description
C46K Series CNC Slant Turn Machine Introduction
The bed is cast with high-quality resin sand, which has good rigidity, good shock resistance, and smooth chip removal. The spindle box bearing adopts an angular contact bearing design with high rigidity. The heat dissipation adopts a corresponding structural design to reduce the thermal deformation of the spindle, so that the spindle can maintain the relative stability of the spindle axis during long-term operation. The X and Z-axis servo motors are directly connected to the precision ball screw through elastic couplings, with high precision. Both ends of the screw are fixed, which improves the support stiffness of the support base and eliminates the screw distortion caused by frequent high-speed positioning and heavy cutting. Deformation is reduced to a minimum, and the bearings adopt a pair of precision bearings with 60-degree angular contact dedicated to the screw, with high speed and high precision.
CNC Slant Turn Machine C46K Series Feature
Adopts 35°Machine Bed, C46K MSY is with Built-in Spindle, Y-Axis 12 Post Driven Tool Turret BMT40, Hydraulic Through Chuck, without Tailstock, suitable for the Plate Workpiece Processing.
C46K is with Servo Spindle, Gang Type, but without Turret and Tailstock.
1. SIEMENS 828D Advanced Control System
Configuration
| Standard Equipment | Optional Equipment |
|---|---|
| 1. SIEMENS 828D Advanced Control System | 1. SYNTEC 22TB Control System |
| 2. A2-5(C46KMSY), A2-6(C46K) | 2. GSK 988TA Absolute Control System |
| 3. Built-in Spindle | 3. RENEISHAW Auto Tool Setter |
| 4. Hydraulic Through Chuck 6 inch | 4. Auto BarFeeder |
| 5. Y-Aixs Lifed 12 Post Driven Tool Turret(BMT40) | 5. Oil Skimmer |
| 6. No Tailstock | 6. Chip Conveyor |
| 7. Roller Linear Guideway | 7. Fly Cutter Device |
Slant Turn Machine C46K Series Specification
| Configuration | C46K MSY | C46K | ||
|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 460 | 400 |
| Maximum Swing Over Slide | φ/mm | 140 | 140 | |
| Maximum Machining Length | mm | 180 | 380 | |
| Maximum Machining Diameter | φ/mm | 160 | 430 | |
| Maximum Diameter of Bar | φ/mm | 45 | 50 | |
| Spindle | Spindle Head Type | GB59001 | A2-5 | A2-6 |
| Spindle Taper Hole | φ/mm | 56 | 62 | |
| Spindle Speed Range | r/min | 60-5000 | 50-3000 | |
| Spindle Shift Mode | Built-in Spindle | Servo | ||
| Spindle Rated Torque | N·m | 110 | 72 | |
| Main Motor Power | kW | 12.3 | 5.5 | |
| Chuck Type | Hydraulic Through Chuck | Hydraulic Through Chuck | ||
| Chuck Size | inch | 6" | 8" | |
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 | 25 |
| Rapid Traverse Speed On Z-axis | m/min | 25 | 25 | |
| Servo Motor Torque On X-axis | N·m | 7.5 | 7.5 | |
| Servo Motor Torque On Z-axis | N·m | 7.5 | 7.5 | |
| X-axis Travel | mm | 90 | 460 | |
| Z-axis Travel | mm | 180 | 400 | |
| Y-axis Travel | mm | ±40 | / | |
| Guideway Type | Roller Linear Guideway | Roller Linear Guideway | ||
| Turret | Turret Type | Y-Axis Lifted 12 Post Driven Tool Turret(BMT40) | Gang Type | |
| Gang Type Workbench Size | mm | 250×730 | 250×730 | |
| Tool Size | 20×20/φ25 /ER20 | 20×20/φ25 | ||
| Tailstock | Tailstock Type | No Tailstock | No Tailstock | |
| Power Source | Total Rated Power | KVA | 18.5 | 13 |
| Total Rated Current | A | 40 | 38 | |
| Dimension | Machine Weight | kg | 2490 | 2390 |
| Machine Dimension | L*W*H(mm) | 2520×1780×2000 | 2520×1780×1820 |
Appearance and parameters may slightly differ depending on the selected options.
