- Home
- Products
- Vertical Turning Lathe
- VTC80 Vertical CNC Lathe Machine
1 / 3
VTC80 Vertical CNC Lathe Machine
VTC80 Vertical CNC Lathe Machine Introduction
Maximum Machining Diameter: 800mm
Chuck Size: 21" inch
TECHNICAL PARAMETERS
VTC80 Vertical CNC Lathe Machine — Description
VTC80 Vertical CNC Lathe Machine Introduction
VTC80 Vertical Turning Lathe is an good product designed and produced based on absorbing the advanced technology of similar machine tools at home and abroad, integrating our factory's many years of experience in producing vertical lathes, and adapting to market demand. This machine tool is economical, efficient, energy-saving, and environmentally friendly, and is the choice for processing complex disk and short-axis parts in automobiles, water pumps, motors, and other industries. This machine tool is equipped with an extended cylindrical roller guide rail with very strong cutting performance. The X and Z axes can run at a speed of 25m/min, enabling high-speed and efficient processing.
1. Built on cutting-edge technologies at home and abroad,
Main Machine Components
| Bed Features 1. The bed features excellent shock absorption due to its high-strength inoculated cast iron construction. 2. One of the prominent bed features is the large chip discharge opening with a wide angle, which effectively dissipates cutting heat. 3. The bed features a rigid structure and good precision retention, thanks to the finite element analysis(FEA) and proper rib layout. | |
| Nitrogen Balance System 1. The high-pressure nitrogen in the accumulator is used to balance the slide weight, which enables high-speed and high-precision machining, reduces the servo motor load, and maintains the machine precision in the long run. 2. The balancer requires no power system, which is energy-saving and environmentally friendly. | |
| High-Performance Integrated Unit Spindle 1 The integrated unit spindle meets the machine tool's demands for high rigidity, speed, and precision simultaneously. 2. With a 0.02mm gap from the machine bed and a large contact area, the spindle features high rigidity and good shock absorption. 3. The spindle has a tight seal against foreign objects, ensuring stable operation in harsh machining conditions. Spindle Speed: 1800rpm Spindle Power: 18.5kW |
Configuration
| Standard Equipment | Optional Equipment |
|---|---|
| 1. SIEMENS 828D Basic Control System | 1. FANUC 0i-TF Plus Control System |
| 2. A2-15 | 2. GSK 988TA Absolute Control System |
| 3. Servo Spindle | 3. 12 Post Driven Tool Turret(BMT65) |
| 4. Hydraulic None Through Chuck 21 inch | 4. Hydraulic Servo8/12 Tool Post Turret |
| 5. Vertical 5 Tool Post Turret | 5. Oil Skimmer |
| 6. No Tailstock | 6. Chip Conveyor |
| 7. Roller Linear Guideway |
VTC80 Vertical Lathe Machine Specification (Standard/Optional)
| Configuration | VTC80(Standard) | |||
|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 900 | |
| Max Machining Height | mm | 650 | ||
| Max Machining Diameter | φ/mm | 800 | ||
| Servo Spindl | Spindle Type | GB59001 | A2-15 | |
| Spindle Speed Range | r/min | 50-1200 | ||
| Spindle Shift Mode | Servo | |||
| Spindle Output Torque | N·m | 800 | ||
| Main Motor Power | kW | 22 | ||
| Chuck Type | Hydraulic None Through Chuck | |||
| Chuck Size | inch | 21" | ||
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 | |
| Rapid Traverse Speed On Z-axis | m/min | 25 | ||
| Servo Motor Torque On X-axis | N·m | 18 | ||
| Servo Motor Torque On Z-axis | N·m | 22 | ||
| X-axis Travel | mm | 445 | ||
| Z-axis Travel | mm | 650 | ||
| Guideway Type | Roller Linear Guideway | |||
| Turret | Turret Type | Vertical 5 Tool Post Turret | ||
| Turning Tools | mm | 32×32 | ||
| Boring Bar Size | φ/mm | 50 | ||
| Power Source | Total Rated Power | KVA | 36 | |
| Total Rated Current | A | 73 | ||
| Dimension | Machine Weight | kg | 9400 | |
| Machine Dimension | L×W×H(mm) | 1900×2200×3100 |
Appearance and parameters may slightly differ depending on the selected options.
VTC80 Vertical Lathe Machine Specification (Standard/Optional)
| Configuration | VTC80(Optioanl) | ||
|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 900 |
| Max Machining Height | mm | 650 | |
| Max Machining Diameter | φ/mm | 800 | |
| Spindle | Spindle Type | GB59001 | A2-15 |
| Spindle Speed Range | r/min | 50-1200 | |
| Spindle Shift Mode | Servo | ||
| Spindle Output Torque | N·m | 800 | |
| Main Motor Power | kW | CTB Main Motor 22 | |
| Chuck Type | Hydraulic None Through Chuck | ||
| Chuck Size | inch | 21" | |
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 |
| Rapid Traverse Speed On Z-axis | m/min | 25 | |
| Servo Motor Torque On X-axis | N·m | 18 | |
| Servo Motor Torque On Z-axis | N·m | 22 | |
| X-axis Travel | mm | 550 | |
| Z-axis Travel | mm | 700 | |
| Guideway Type | Roller Linear Guideway | ||
| Turret | Turret Type | Hydraulic Servo 8/12 Tool Post Turret | |
| Turning Tools | mm | 32×32 | |
| Boring Bar Size | φ/mm | 50 | |
| Power Source | Total Rated Power | KVA | 36 |
| Total Rated Current | A | 73 | |
| Dimension | Machine Weight | kg | 9400 |
| Machine Dimension | L×W×H(mm) | 1900×2200×3100 |
Appearance and parameters may slightly differ depending on the selected options.
VTC80 Vertical Lathe Machine Specification (Standard/Optional)
| Configuration | VTC80(Optional) | ||
|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 900 |
| Max Machining Height | mm | 650 | |
| Max Machining Diameter | φ/mm | 800 | |
| Spindle | Spindle Type | GB59001 | A2-15 |
| Spindle Speed Range | r/min | 50-1200 | |
| Spindle Shift Mode | Servo | ||
| Spindle Output Torque | N·m | 800 | |
| Main Motor Power | kW | CTB Main Motor 22 | |
| Chuck Type | Hydraulic None Through Chuck | ||
| Chuck Size | inch | 21" | |
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 |
| Rapid Traverse Speed On Z-axis | m/min | 25 | |
| Servo Motor Torque On X-axis | N·m | 18 | |
| Servo Motor Torque On Z-axis | N·m | 22 | |
| X-axis Travel | mm | 550 | |
| Z-axis Travel | mm | 700 | |
| Guideway Type | Roller Linear Guideway | ||
| Turret | Turret Type | 12 Post Driven Tool Turret(BMT65) | |
| Turning Tools | mm | 25×25/ER40 | |
| Boring Bar Size | φ/mm | 40 | |
| Power Source | Total Rated Power | KVA | 36 |
| Total Rated Current | A | 73 | |
| Dimension | Machine Weight | kg | 9400 |
| Machine Dimension | L×W×H(mm) | 1900×2200×3100 |
Appearance and parameters may slightly differ depending on the selected options.
