- Home
- Products
- Vertical Turning Lathe
- VTC65 CNC Vertical Lathe Machine
1 / 3
VTC65 CNC Vertical Lathe Machine
VTC65 CNC Vertical Lathe Machine Introduction
Maximum Machining Diameter: 650mm
Chuck Size: 15" inch
TECHNICAL PARAMETERS
VTC65 CNC Vertical Lathe Machine — Description
VTC65 CNC Vertical Lathe Machine Introduction
1. Built on cutting-edge technologies at home and abroad, the vertical lathe VTC65 is economical, efficient, energy-saving, and environmentally friendly, the first choice for machining complex disc and short shaft parts in automobile, water pump, motor, and other industries.
2. This machine adopts an extended heavy-duty roller linear guideway, which has good cuting rigidity, dynamic response performance, good precision retention, and a long service life.
3. This machine can turn various threads, arcs, cones, and inner and outer curved surfaces of rotating parts. It can also meet the speed requirement for cutting ferrous and non-ferrous metal materials.
4. This machine is mainly used for machining large and heavy workpieces with large radial
Main Machine Components
| Bed Features 1. The bed features excellent shock absorption due to its high-strength inoculated cast iron construction. 2. One of the prominent bed features is the large chip discharge opening with a wide angle, which effectively dissipates cutting heat. 3. The bed features a rigid structure and good precision retention, thanks to the finite element analysis(FEA) and proper rib layout. | |
| Nitrogen Balance System 1. The high-pressure nitrogen in the accumulator is used to balance the slide weight, which enables high-speed and high-precision machining, reduces the servo motor load, and maintains the machine precision in the long run. 2. The balancer requires no power system, which is energy-saving and environmentally friendly. | |
| High-Performance Integrated Unit Spindle 1 The integrated unit spindle meets the machine tool's demands for high rigidity, speed, and precision simultaneously. 2. With a 0.02mm gap from the machine bed and a large contact area, the spindle features high rigidity and good shock absorption. 3. The spindle has a tight seal against foreign objects, ensuring stable operation in harsh machining conditions. Spindle Speed: 1800rpm Spindle Power: 18.5kW |
Configuration
| Standard Equipment | Optional Equipment |
|---|---|
| 1. SIEMENS 828D Basic Control System | 1. FANUC 0i-TF Plus Control System |
| 2. A2-11 | 2. GSK 988TA Absolute Control System |
| 3. Servo Spindle | 3. 12 Post Driven Tool Turret(BMT65) |
| 4. Hydraulic None Through Chuck 15inch | 4. Oil Skimmer |
| 5. Hydraulic Servo 12 Tool Post Turret | 5. Chip Conveyor |
| 6. No Tailstock | |
| 7. Roller Linear Guideway |
VTC65 CNC Vertical Lathe Specification
| Configuration | VTC65 | |||
|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 720 | 720 |
| Max Machining Height | mm | 650 | 550 | |
| Max Machining Diameter | φ/mm | 650 | 600 | |
| Servo Spindle | Spindle Type | GB59001 | A2-11 | |
| Spindle Speed Range | r/min | 50-1800 | ||
| Spindle Shift Mode | Servo | |||
| Spindle Output Torque | N·m | 800 | ||
| Main Motor Power | kW | 18.5 | ||
| Chuck Type | Hydraulic None Through Chuck | |||
| Chuck Size | inch | 15" | ||
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 25 | |
| Rapid Traverse Speed On Z-axis | m/min | 25 | ||
| Servo Motor Torque On X-axis | N·m | 18 | ||
| Servo Motor Torque On Z-axis | N·m | 22 | ||
| X-axis Travel | mm | 330 | ||
| Z-axis Travel | mm | 700 | 650 | |
| Guideway Type | Roller Linear Guideway | |||
| Turret | Turret Type | Hydraulic Servo 12 Tool Post Turret | 12 Post Driven Tool Turret(BMT65) | |
| Turning Tools | mm | 32×32 | 25×25/ER40 | |
| Boring Bar Size | φ/mm | 50 | 40 | |
| Power Source | Total Rated Power | KVA | 30 | |
| Total Rated Current | A | 65 | ||
| Dimension | Machine Weight | kg | 8500 | 8550 |
| Machine Dimension | L×W×H(mm) | 1800×2000×3100 |
Appearance and parameters may slightly differ depending on the selected options.
