- Home
- Products
- CNC Flat Bed Lathe
- CK6150/CK6150-B/CK6150-L Flat Bed CNC Lathe
1 / 3
CK6150/CK6150-B/CK6150-L Flat Bed CNC Lathe
CK6150 Series Flat Bed CNC Lathe Introduction
Maximum Machining Diameter: 500mm
Maximum Machining Length: 1000mm
Chuck Size: 10" inch
TECHNICAL PARAMETERS
CK6150/CK6150-B/CK6150-L Flat Bed CNC Lathe — Description
CK6150 Series Flat Bed CNC Lathe Introduction
1. The machine is an optimized version of the traditional CK6150 and features high precision, speed, and rigidity. It is ergonomic and easy to use. Integral protection is provided to keep the environment clean and tidy.
2. The bed is integrally cast using the resin sand process. After multiple heat treatment processes such as aging and high-frequency quenching, the specially widened guide way can maintain optimal machining precision for a long Time.
3. The machine tool features high-precision ball screws and angular contact ball bearings connected to the servo motor via a dedicated flexible coupling, enabling high transmission precision and a long service life.
4. The servo spindle motor can achieve stepless speed change in the spindle gear
Main Machine Components
| Spindle The spindle box combines the double-row short cylindrical roller bearings and bidirectional thrust ball bearings. The main servo motor, paired with the three gears inside the box, enables stepless speed change within each gear, achieving high torque, high rigidity, and ensuring the accuracy during long-term heavy cutting. Spindle Power: 7.5kw Spindle Taper Hole: Ф86 mm | |
| Widened Bed The triangular rib is widened and thickened. The contact surface of the carriage is increased. The rigidity and seismic resistance are greatly improved. X/Z-axis Travel: 310/1050mm X/Z-axis Rapid Traverse Speed: 8/10m/min | |
| Slide The front of the large slide is widened and lengthened to improve the cutting stability and rigidity by 30% and greatly extend the service life of the machine. |
Configuration
| Standard Equipment | Optional Equipment |
|---|---|
| 1. SIEMENS 808D Advanced Control System | 1. FANUC 0i-TF Plus Control System |
| 2. A2-6 | 2. GSK 988TA Absolute Control System |
| 3. Servo Spindle | 3. Hydraulic Through Chuck 8inch |
| 4. Manual Chuck 10 inch | 4. Hydraulic None Through Chuck 10inch |
| 5. Manual Tailstock | 5. Hydraulic Tailstock |
| 6. Electric 4 Post Turret | 6. PRAGATI BTP63 Electric 8 Tool Post Turret |
| 7. Hard Guideway | 7. Auto Bar Feeder |
| 8. Oil Skimmer |
Flat Bed Lathe Machine CK6150 Series Specification
| Configuration | CK6150 | CK6150-B | CK6150-L | ||
|---|---|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 500 | 500 | 500 |
| Maximum Swing Over Slide | φ/mm | 300 | 300 | 290 | |
| Maximum Machining Lenght | mm | 500 | 500 | 500 | |
| Maximum Machining Diameter | φ/mm | 1000 | 1000 | 1500/2000 | |
| Spindle | Spindle Head Type | GB59001 | A2-8 | A2-8 | A2-8 |
| Spindle Taper Hole | φ/mm | 86 | 86 | 90 | |
| Spindle Speed Range | r/min | 50-300,300-789, 655-1260 | 60-2000 | 45-260,140-800,280-1600 | |
| Spindle Shift Mode | Gear | Seryo | Gear | ||
| Spindle Rated Torque | N·m | 600 | 600 | 1500rpm→47.75Nm; 100rpm→716Nm | |
| Main Motor Power | kW | 7.5 | 7.5 | 7.5 | |
| Chuck Type | Manual Chuck | Manual Chuck | Manual Chuck | ||
| Chuck Size | inch | 10 | 10 | 10 | |
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 8 | 8 | 6 |
| Rapid Traverse Speed On Z-axis | m/min | 10 | 10 | 10 | |
| Servo Motor Torque On X-axis | N·m | 5 | 5 | 5 | |
| Servo Motor Torque On Z-axis | N·m | 7.5 | 7.5 | 7.5 | |
| X-axis Travel | mm | 310 | 310 | 290 | |
| Z-axis Travel | mm | 1050 | 1050 | 1550/2050 | |
| Guideway Type | Hard Guideway | Hard Guideway | Hard Guideway | ||
| Turret | Turret Type | Electric4 Post Turret | Electric 4 Post Turret | Electric 4 Post Turret | |
| Tool Size | mm | 25×25 | 25×25 | 25×25 | |
| Tailstock | Tailstock Type | Manual | Manual | Manual | |
| Tailstock Sleeve Diameter | φ/mm | 75 | 75 | 75 | |
| Tailstock Sleeve Travel | mm | 120 | 120 | 150 | |
| Internal Taper of Tailstock Sleeve | MT5 | MT5 | MT5 | ||
| Power Source | Total Rated Power | KVA | 11 | 11 | 15 |
| Total Rated Current | A | 20 | 20 | 26 | |
| Dimension | Machine Weight | kg | 2385 | 2385 | 2700/3000 |
| Machine Dimension | L×W×H(mm) | 2600×1220×1650 | 2600×1220×1650 | 3250×1465×1705 3750×1465×1705 |
Appearance and parameters may slightly differ depending on the selected options.
