- Home
- Products
- CNC Flat Bed Lathe
- CJK6130L CNC Horizontal Lathe Machine
1 / 3
CJK6130L CNC Horizontal Lathe Machine
CJK6130L CNC Horizontal Lathe Machine Introduction
Maximum Machining Diameter: 150mm
Maximum Machining Length: 200mm
Chuck Size: 6" inch
TECHNICAL PARAMETERS
CJK6130L CNC Horizontal Lathe Machine — Description
CJK6130L CNC Horizontal Lathe Machine Introduction
1. The CJK6130L is a small-sized lathe, which is suitable for the high-efficiency machining of high-precision and complex small rotary parts in industries such as instrumentation, electronics, medical devices and aviation.
2. X/Z-axis servo motors are directly connected to the precision ball screw through flexible couplings. The rigidity of mounting base is improved to minimize the screw deformation caused by frequent, high-speed positioning orheavy cutting.
3. Full guideway protection is used. The plastic coating of the guideway also improves the wear resistance and increases the running speed of the machine.
4. Full guideway protection also ensures the machine precision and prolongs the service life.Full cover protection prevents cut
Main Machine Components
| Spindle High-quality angular contact bearings (three in the front and two at the rear) and the main servo motor are adopted, It features high speed, high precision, low noise, high rigidity, high torque, and long-term stability of heavy cutting precision. Spindle Speed: 3000rpm Spindle Power: 3.7kW Spindle Taper Hole: Ф48mm | |
| X-axis: Hard Guideway / Z-axis: Linear Guideway X/Z-axis servo motors are directly connected to the precision ball screws through flexible couplings to achieve high-precision gapless transmission. Z-axis use high-precision linear guideway, X-axis uses dovetail hard guideway, enabling a fast moving speed and high machining accuracy. X/Z-axis Travel: 220/220mm X/Z-axis Rapid Traverse Speed: 12/20m/min | |
| Manual Tailstock Tailstock Sleeve Diameter: Φ54mm Tailstock Sleeve Travel: 150mm |
Configuration
| Standard Equipment | Optional Equipment |
|---|---|
| 1. SIEMENS 808D Advanced Control System | 1. GSK 988TA Absolute Control System |
| 2. A2-5 | 2. Hydraulic None Through Chuck 6inch |
| 3. Servo Spindle | 3. Manual Chuck 6inch |
| 4. X-axis: Hard Guideway, Z-axis: Linear Guideway | 4. Hydraulic Collet Chuck |
| 5. Hydraulic Through Chuck 6inch | 5. Hydraulic/Pneumatic/without Tailstock |
| 6. Manual Tailstock | 6. Electric 4 Post Turret |
| 7. Gang Type | 7. Auto Bar Feeder |
| 8. Hard Guideway | 8. Oil Skimmer |
CJK6130L CNC Horizontal Lathe Specification
| Configuration | CJK6130L | ||
|---|---|---|---|
| Machining Capacity | Maximum Swing Over Bed | φ/mm | 275 |
| Maximum Swing Over Slide | φ/mm | 150 | |
| Maximum Machining Lenght | mm | 200 | |
| Maximum Machining Diameter | φ/mm | 150 | |
| Maximum Diameter of Bar | φ/mm | 36 | |
| Spindle | Spindle Head Type | GB59001 | A2-5 |
| Spindle Taper Hole | φ/mm | 48 | |
| Spindle Speed Range | r/min | 50-3000 | |
| Spindle Shift Mode | Inverter | ||
| Spindle Output Torque | N·m | 45 | |
| Main Motor Power | kW | 3.7 | |
| Chuck Type | Hydraulic Through Chuck | ||
| Chuck Size | inch | 6 | |
| Feed Rate | Rapid Traverse Speed On X-axis | m/min | 12 |
| Rapid Traverse Speed On Z-axis | m/min | 20 | |
| Servo Motor Torque On X-axis | N·m | 4 | |
| Servo Motor Torque On Z-axis | N·m | 6 | |
| X-axis Travel | mm | 280 | |
| Z-axis Travel | mm | 320 | |
| Guideway Type | X-Axis: Hard Guideway, Z-Axis: Linear Guideway | ||
| Turret | Turret Type | Gang Type | |
| Tool Size | mm | 20×20 | |
| Tailstock | Tailstock Type | Manual | |
| Tailstock Sleeve Diameter | φ/mm | 54 | |
| Tailstock Sleeve Travel | mm | 120 | |
| Internal Taper of Tailstock Sleeve | MT4 | ||
| Power Source | Total Rated Power | KVA | 8 |
| Total Rated Current | A | 25 | |
| Dimension | Machine Weight | kg | 1450 |
| Machine Dimension | L×W×H(mm) | 1840×1230×1680 |
Appearance and parameters may slightly differ depending on the selected options.
