- Главная
- Products
- Вертикальные токарные станки
- VTC50 High Speed Vertical Turret Lathe
1 / 3
VTC50 High Speed Vertical Turret Lathe
VTC50 Vertical Turret Lathe Introduction
Макс. диаметр обработки: 500mm
Размер патрона: 12" inch
ТЕХНИЧЕСКИЕ ПАРАМЕТРЫ
VTC50 High Speed Vertical Turret Lathe — Описание
VTC50 Vertical Turret Lathe Introduction
This machine tool is equipped with an extended cylindrical roller guide rail with very strong cutting performance. The spindle speed can reach 3000rpm, and the X and Z axis rapid running speed can reach 25m/min, which can achieve high-speed and efficient processing.
The vertical carriage of the machine tool is equipped with a gas-liquid balance system, which uses high-pressure nitrogen and hydraulic oil to balance the weight of the carriage and turret, allowing the machine tool to operate at high speed and precision, reducing the load on the servo motor, increasing the accuracy and life of the machine tool, and preventing There are dangers such as the carriage falling when an unexpected power outage occurs.
1. Built on cutting-edge technologies a
Основные компоненты станка
| Bed Features 1. The bed features excellent shock absorption due to its high-strength inoculated cast iron construction. 2. One of the prominent bed features is the large chip discharge opening with a wide angle, which effectively dissipates cutting heat. 3. The bed features a rigid structure and good precision retention, thanks to the finite element analysis(FEA) and proper rib layout. | |
| Nitrogen Balance System 1. The high-pressure nitrogen in the accumulator is used to balance the slide weight, which enables high-speed and high-precision machining, reduces the servo motor load, and maintains the machine precision in the long run. 2. The balancer requires no power system, which is energy-saving and environmentally friendly. | |
| High-Performance Integrated Unit Spindle 1. The integrated unit spindle meets the machine tool's demands for high rigidity, speed, and precision simultaneously. 2. With a 0.02mm gap from the machine bed and a large contact area, the spindle features high rigidity and good shock absorption. 3. The spindle has a tight seal against foreign objects, ensuring stable operation in harsh machining conditions. Spindle Speed: 3000rpm Spindle Power: 15kW |
Конфигурация
| Стандартная комплектация | Дополнительные опции |
|---|---|
| 1. SIEMENS 808D Advanced Control System | 1. FANUC 0i-TF Plus Control System |
| 2. A2-8 | 2. GSK 988TA Absolute Control System |
| 3. Servo Spindle | 3. 12 Post Driven Tool Turret |
| 4. Hydraulic None Through Chuck 12 inch | 4. Oil Skimmer |
| 5. Hydraulic Servo 12 Tool Post Turret | 5. Chip Conveyor |
| 6. No Tailstock | |
| 7. Roller Linear Guideway |
VTC50 Vertical Turret Lathe Machine Specification
| Конфигурация | VTC50 | ||
|---|---|---|---|
| Обрабатывающие возможности | Макс. диаметр над станиной | φ/mm | 550 |
| Макс. высота обработки | mm | 390 | |
| Макс. диаметр обработки | φ/mm | 500 | |
| Серво-шпиндель | Тип шпинделя | GB59001 | A2-8 |
| Диапазон оборотов шпинделя | r/min | 50-3000 | |
| Привод шпинделя | Servo | ||
| Крутящий момент шпинделя | N·m | 300 | |
| Мощность главного привода | kW | 15 | |
| Тип патрона | Hydraulic None Through Chuck | ||
| Размер патрона | inch | 12" | |
| Подача и перемещение | Быстрое перемещение по оси X | m/min | 25 |
| Быстрое перемещение по оси Z | m/min | 25 | |
| Момент серводвигателя оси X | N·m | 10 | |
| Момент серводвигателя оси Z | N·m | 15 | |
| X-axis Travel | mm | 255 | |
| Z-axis Travel | mm | 390 | |
| Guideway Type | Roller Linear Guideway | ||
| Инструментальная головка | Тип инструментальной головки | Hydraulic Servo 12 Tool Post Turret | |
| Размер резца/расточной оправки | mm | 25×25/φ40 | |
| Электропитание | Номинальная мощность | KVA | 25 |
| Номинальный ток | A | 52 | |
| Габариты и масса | Масса станка | kg | 5050 |
| Габариты станка | L×W×H(mm) | 1600×1950×2450 |
Внешний вид и параметры могут незначительно отличаться в зависимости от выбранных опций.
